光轉光收發器

ENTU763GO 光模組對光模組的轉換器有兩個光模組的插槽。此設備可以轉換兩個光模組的光學數位信號,可為不同波長、不同距離或是不同模式(單模/雙模)和相同速度的100MHz或是1GHz 自動檢測。此設備允許在CO和CPE的模式下使用IEEE802.3ah 鍊路層OAM和TS-1000 OAM來維護ENTU763GO。

報價  型錄

  • Feature

    • Protocol transparent 3R fiber media transponder/repeater (Re-amplification, Re-shaping and Re-clocking)
    • Data rates up to 1G
    • Extend transmission distance from fiber
    • Perform optical repeater function
    • Support SFP DDM (Digital Diagnostics Monitoring)
    • Comply with IEEE 802.1Q Tag VLAN
    • Support Q-in-Q function
    • Maximum Frame size 9K bytes
    • Ethernet bandwidth Control
    • LED indicators for ease of network diagnostic
    • Prompt indication on network failure
    • Firmware upgrade via HTTP
    • Built-in IP-based WEB GUI configuration and maintenance
    • Centralized install with iEAC-16 via web or SNMP management
  • Specifications

    Model
    • ENTU 763S/GO Stand alone Ethernet repeater
    • ENTU 763C/GO Card type Ethernet repeater
    Network Interface
    • Connector type: SFP (MINI-GBIC)
    • SFP type: 100Base-FX SFP modules
    • 1000Base-X SFP modules
    • Support SFP DDM (Digital Diagnostic Monitoring)
    • Temperature, Voltage, Current, Tx Power, Rx Power
    • For detailed wavelength and distance of SFP modules, please refer to SFP Transceivers datasheet
    User Interface
    • Connector type: SFP (MINI-GBIC)
    • SFP type: 100Base-FX SFP modules
    • 1000Base-X SFP modules
    Ethernet feature
    • Link Status
    • Management IP: static IP or DHCP
    • Ethernet bandwidth control
    • Complies with IEEE 802.1q Tag VLAN (including Q-in-Q)
    • Jumbo frame to 9k bytes
    Management & OAM Functions
    • Configuration via craft port VT-100 and WEB GUI
    • Console: RJ45 connector (RS232C)
    • HTTP firmware upgrade
    • RMON counter
    • Front panel test button for easy loop healthy testing
    • Reset button back to factory default
    • Support IEEE 802.3ah Link Layer OAM(network side)

    Auto discovery
    Link monitoring
    Remote loopback test
    Remote fault detection

    • Link Fault Reflection
    • Dying Gasp
    • Critical Event
    • Support TS-1000 OAM(network side)

    Loopback test
    Reset remote device
    Get remote device information
    Remote port setting

    LED Indicators
    • PWR, WAN LNK, CO, TST, TP, RF, LAN LNK
    Power Requirement (Stand alone)
    • AC/DC, DC/DC external power adapter (12V, 0.5A)
    • Power consumption: 3.3W
    Dimension
    • 87(W) x 172(D) x 24(H) mm
    Operating Environment
    • Operation Temperature: 0 o C ~ 50 o C
    • Storage Temperature: -20 o C ~ 70 o C
    • Humidity: 90%, non-condensing
  • Application

    Application