10G光纖交換機 – ENTU 783

ENTU 783系列就是所謂的10G光纖交換機。 ENTU 783的接口包括一個10Gb以太網端口和三個光學SFP +端口。使用背板的快速設置開關,用戶可以輕鬆地從MDC模式切換到以太網交換機模式。為了與不同的線路速率互相操作,它支援流量控制,該流量控制可以動態發送暫停幀以控制傳輸速率,避免大量的數據封包進行傳輸。

報價  型錄

分類:
  • Feature

    • One Copper Interface: Comply with IEEE 802.3u/ 802.3ab/ 802.3bz/ 802.3an standard as 100Base-Tx/ 1000Base-T/ NBase- T/ 10GBase-T (100M/1G/2.5G/5G/10G), Auto Negotiation
    • Three Optical Fiber Interface: Comply with IEEE 802.3z and 802.3ae standard as 1000Base-X and 10GBase-R, those use SFP+ to 10GBASE-SR, 10GBASE-LR, 10GBASE-ER or 10GBASE-ZR for different transmission distance and wavelength
    • Compact size, Triple optical ports Media Data Converter (MDC) in one mini box.
    • Support IEEE 802.3ah In-band OAM for remote management
    • Comply with SFF-8472 industry-standard and support SFP DDM
    • (Digital Diagnostics Monitoring)
    • Support IEEE 802.3x Flow Control, Auto MDI/MDIX
    • Support cable diagnostics feature for copper wires
    • Comply with IEEE 802.1q Tag based VLAN
    • Support IEEE 802.1ad Q-in-Q function
    • Maximum Frame size 12K bytes (Jumbo frame)
    • Ethernet Storm and Bandwidth control (Rate Limit)
    • Support port trunking and STP/ RSTP for loop prevention
    • Provide RMON counter, ACL, Mirror and VLAN Translation.
    • Laser Auto-shutdown, LLCF and RFD for optical link protection.
    • Management by Web (HTTPs) and SNMP V1/V2c/V3 supported
    • Report all alarm status to the designated NMS and computer terminal interface
  • Specifications

    Model
    • ENTU 783S, Triple optical link 10G Ethernet NTU Standalone
    • ENTU 783C, Triple optical link 10G Ethernet NTU card type
    Network Interface: Optical SFP
    • Connector type: 3 x SFP+
    • 10GBase-R or 1000Base-X port
    • Allow for 10GBASE-SR, 10GBASE-LR, 10GBASE-ER and 10GBASE-ZR in different transmission distance
    • Automatic Laser Shutdown (ALS)
    • IEEE 802.3ad Port Trunking: Bandwidth Aggregation by join
    • Support SFP DDM (Digital Diagnostic Monitoring):

    Compliant with SFF-8472 SFP DDM (Digital Diagnostic
    Monitoring), include temperature, supply voltage, bias
    current, transmitted and received power

    User Interface: Ethernet
    • Connector type: One shield RJ-45 jack
    • Auto-negotiation 100M/1G/2.5G/5G/10G different speed – Auto-MDI/MDIX detection
    • Support cable diagnostics feature for copper wires
    Networking Function
    • Link Transparent in Media Data Converter (MDC) mode – IEEE 802.3x Flow Control
    • Ethernet bandwidth control
    • RMON counter
    • Ethernet Port Mirror
    • Maximum frame size up to 12k byte (Jumbo Frame) – Complies with IEEE 802.1p QoS
    • DHCP & SNTP Client
    • VLAN Translation
    • IEEE 802.1q Tagged based VLAN
    • IEEE 802.1ad Q-in-Q
    • IEEE 802.3az Energy Efficient Ethernet
    • IEEE 802.1d STP, IEEE 802.1w RSTP
    Management & OAM Functions
    • Quick setup MDC or Ethernet Switch mode via DIP switch
    • Configure via WEB (HTTPs) or SNMP V1/V2c/V3
    • RJ45 connector (RS232C): Craft port
    • TFTP/HTTP firmware upgrade
    • Reset button back to factory default
    • Support warning threshold for setting the upper and lower limit of optical parameters to send a warning message
    • Support IEEE 802.3ah Link Layer OAM
    • Auto discovery
      Link monitoring
      Loopback test
      Dying Gasp
      Fully remote control device

    • Enhanced Login security check
    • Three access levels for administrator, operator, user and operation log
    • Support login password complexity of 6 characters, lower and uppercase letters, digits, special symbols
    • Anti camouflage attack mechanism: lock IP and delay login
    LED Indicators
    • PWR, Port 1~4: LNK/SPD
    Power Requirement
    • AC/DC, DC/DC external power adapter (12V, 2A)
    • Power consumption < 15W
    Dimension
    • ENTU 783: 89(W) x 175(D) x 37(H) mm
    Operating Environment
    • Operating temperature: 0 oC ~ 50 oC
    • StorageTemperature: -20oC~70oC
    • Humidity: 90%, non-condensing
  • Application

    Application