-
特色
- High-powered industrial cellular module
- High-powered industrial 32bits CPU
- Support low-consumption mode, including sleep
- mode, scheduled online/ offline mode, scheduled
- power-on/ power-off mode(optional)
- Support auto recovery mechanism, including online
- detect, auto redial when offline to make Router always online
- Ethernet port: 1.5KV magnetic isolation
- Support standard RS232 (or RS485/ RS422), Ethernet
- and WIFI port that can connect to serial, Ethernet and WI-FI devices directly
- Support intellectual mode, enter into communication state automatically when powered
-
規格
Model
- RFFA20836: FDD-LTE WiFi, 1x WAN, 4x LAN, 2x Cellular, 1x WiFi, 1x SIM/UIM
Standard and Band
- FDD-LTE2600/2100/1800/900/800MHz,700/1700/2100MHz(optional)
- DC-HSPA+/HSPA+/HSDPA/HSUPA/UMTS850/900/2100MHz,800/850/1900/2100MHz(optional)
- EDGE/GPRS/GSM850/900/1800/1900MHz
- GPRS CLASS10
- GPRS CLASS12
Bandwidth
- FDD-LTE: Download speed 100Mbps, Upload speed 50Mbps
- DC-HSPA+: Download speed42Mbps, Upload speed 5.76Mbps
- HSPA+: Download speed 21Mbps, Upload speed 5.76Mbps
- HSDPA: Download speed7.2Mbps
- HSUPA: Upload speed 5.76Mbps
- UMTS: 384Kbps
WIFI Specification
- Standard: IEEE802.11b/g/n
- Bandwidth:
- Security: WEP, WPA, WPA2, etc WPS (optional)
- TX power: 20dBm (11n), 24dBm (11g), 26dBm (11b)
- RX sensitivity: <-72dBm@54Mpbs
IEEE802.11b/g: 54Mbps (max)
IEEE802.11n: 150Mbps (max)Hardware System
- CPU: Industrial 32bits CPU
- FLASH: 16MB (Extendable to 64MB)
- DDR2: 128MB
Interface type
- WAN: 1 10/100Mbps WAN port (RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
- LAN: 4 10/100Mbps Ethernet ports (RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
- Serial: 1 RS232 (or RS485/ RS422) port, 15KV ESD protection
- Indicator: “Power”, “System”, “Online”, “SIM”, “Local Network”, “WAN”, “WIFI”, “Signal Strength”
- Antenna:
- SIM/UIM:
- Power:
- Reset:
Databits: 5, 6, 7, 8
Stopbits: 1, 1.5(optional), 2
Parity: none, even, odd, space(optional), mark(optional)
Baudrate: 2400~115200bpsCellular: 2 Standard SMA female interface, 50ohm, lighting protection (optional)
WIFI: 1 Standard SMA male interface, 50ohm, lighting protection (optional)Standard3V/1.8Vusercardinterface, 15KV ESD protection
Standard3-PINpowerjack, reverse-voltage and over-voltage protection
Restore the Router to its original factory default settings
Power Supply
- Standard Power: DC 12V/1.5A
- Power range: DC 5~3V
Consumption
- Standby: 293~326mA@12VDC
- Communication: 310~554mA@12VDC
- Schedule Shutdown: 2.75~4.2mA@12VDC
Physical Characteristics
- Housing: Iron, providing IP30 protection
- Dimensions: 207x135x28mm
- Weight: 790g
Environment
- Operating temperature: -35℃ ~ +75℃; (-31~+167℉) 95%(unfreezing)
- Storage temperature: -40℃ ~ +85℃; (-40~+185℉)
-
應用
工規 LTE Wi-Fi 路由器
RFFA20836 is a kind of cellular terminal device that provides large data transfer function by public GPRS/CDMA/WCDMA/EVDO/LTE network. It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration. It has been widely used on M2M fields, such as self-service terminal industry, intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.