G.SHDSL.bis EFM 網路延伸傳輸介面轉換器 (FE)

台聯 SNTU 764FC 系列,可稱之為乙太網路接取設備 (EAD)、乙太網路媒體資料轉換器 (MDC) 或乙太網路 DSL 調變解調器,它利用最新的 G.SHDSL.bis 標準,是一種能夠傳輸流量的迷你終端,從乙太網路接口透過 EFM 綁定 2/ 4/ 8 線 G.SHDSL.bis 鏈路,速度為 5.7/ 11.4/ 22.8Mbps。

SNTU 764FC 系列支援高速專用對稱資料傳輸並利用 DSL 頻寬,透過 2 線銅線,自動線路速率可達 15Mbps,SNTU 764FC 系列作為乙太網路延伸器,最多可支援 8 條線,可提高線路速率並提供超過 60Mbps 的聚合頻寬,此外,SNTU 764FC 系列是智慧乙太網路接取機箱 iEAC-16 的線路卡,作為 ISP 長途乙太網路接取服務的中心局,它彌補了 ADSL 和 VDSL 的缺點,提供點對多點的服務。

SNTU 764FC 系列是電信運營業者、服務供應商和企業用戶的完美解決方案,為了減輕操作/ 管理負擔,SNTU 764FC 系列可以依照 ITU-T G.991.2 透過嵌入式操作通道 (EOC) 控制和監控遠端單元,管理者還可以透過 Telnet (SSH)、Web (HTTP/ HTTPS) 或透過 SNMP 代理輕鬆設定 SNTU 764FC 系列。

報價  型錄

  • 特色

    • Point to point Ethernet extension over multiple G.SHDSL.bis copper lines
    • Compliant with IEEE 802.3ah EFM 2Base-TL bonding technology
    • Compliant with ITU-T G.991.2 standard, TC-PAM 16/32/64/128 line coding
    • 1, 2 or 4 pairs G.SHDSL.bis with 5.7Mbps per pairs
    • Support extension rate up to 60Mbps over 4 pairs of copper
    • CO and CPE mode selectable
    • Automatic line rate selection with Line Probe enabled
    • Front panel status LED indicators for easy monitoring
    • Easy installation with iEAC-16, Telnet (SSH), WEB GUI (HTTPS) and SNMP v1/v2c/v3
    • Front panel test button for easy OAM loop diagnostic
    • Provides extensive diagnostics, including loopback, G.SHDSL.bis performance monitoring
    • Easy software upgrade for field-deployed units via Web or TFTP
    • DSL line protection for data transmission
    • Ethernet switching and bridging with VLAN prioritization and QoS
    • Supports security-link feature for specific DSL link
    • IP Sharing function supports Static route, DHCP client/server/relay, NAT and DNS relay
    • Interoperate with Comet 160xF series
  • 規格

    Model
    • SNTU 764FC/2W, line card type, G.shdsl.bis NTU, 2-wire,2 FE
    • SNTU 764FC/4W, line card type, G.shdsl.bis NTU, 4-wire,2 FE
    • SNTU 764FC/8W, line card type, G.shdsl.bis NTU, 8-wire,2 FE

    Interoperability with stand alone Comet 160xF Series

    • Comet 1602F, stand alone, 2-wire, 4 FE
    • Comet 1604F, stand alone, 4-wire, 4 FE
    • Comet 1608F, stand alone, 8-wire, 4 FE
    Network Interface – G.SHDSL.bis
    • Type: 2, 4 or 8-wire
    • Standard: ITU-T G.991.2 Annex A,B,F,G, ETSI 101 524
    • Bonding protocol: IEEE 802.3ah EFM 2Base-TL
    • Line rate: n x 64Kbps, n=3~239(2w), 6~478(4w), 12~956(8w)
    • Connector: 1 x RJ-45
    • Line coding: TC-PAM 16/32/64/128
    • Impedance: 135 ohm
    • ITU K.21 compliant
    User Interface
    • Ethernet type: 10/100 Base-T
    • Connector: 2 x RJ-45
    • Support 802.3x flow control
    • Auto-MDI/MDIX detection, Full duplex / Half duplex support
    • Auto-negotiation for speed and duplex
    • Support Layer 2 function
    • IPv4/IPv6 supports
    Ethernet function
    • Support 802.1d transparent bridge function
    • Supporting Bridge filter function based on source MAC addresses
    • Scalable per port bandwidth control (Step = 64K, up to 100M)
    • Support 802.3x flow control
    • 2K MAC learning address
    • Ethernet packet length up to 2048 bytes
    • Provide 802.1q VLAN tagging, up to 4094 VLAN and VID
    • Support 802.1p QoS facility
    • Ethernet Ring Protection switching (ERPS)**
    • Support SNTP protocol to get network time
    • DHCP Client/ Server/ Relay
    • Static Route
    • Network Address Translation (NAT)
    Management
    • Configuration via Telnet (SSH), WEB GUI (HTTP/HTTPS), SNMP v1/v2c/v3 and TR-069**
    • Support iEAC-16 local or remote management
    • Local and Remote loopback for diagnostic
    • Support Performance Monitoring function
    • Firmware upgradeable via Web or TFTP
    • Front panel test button for easily loop healthy testing
    • Front panel reset to default button
    • Support three access levels for administrator, operator, user and operation log
    • Support login password complexity of 6 characters, uppercase and lowercase letters, digits, special symbols
    • Anti camouflage attack mechanism: lock IP and delay login
    LED Indicators
    • SNTU series:
    • PWR, CO, ALM, TST, DSL1~DSL4, ETH LNK/SPD
    Power Requirement
    • AC/DC, DC/DC external power adapter (12V, 1A)
    Dimension
    • SNTU 764FC: 84(W) x 168(D) x 24(H) mm
    Operating Environment
    • Operation Temperature: 0 ℃ ~ 50 ℃
    • Storage Temperature: -20 ℃ ~ 75 ℃
    • Humidity: 90%, non-condensing

    Note:
    ** Features and specifications are subject to change without prior notice.

  • 應用

    應用