智慧網管型乙太網路接取機架

iEAC-16(智慧網管型乙太網路接取機架),為2U高19英寸標準機框,包含控制單 元 MCU-16 ,雙備載AC/DC電源模組,以及16個可以自由配置FNTU、ENTU 、SNTU 和 VNTU卡板的插 槽,所有模組均支援熱插拔。管理方式包括 SNMP, Web GUI,CLI ( Telnet 或 craft 管理口)。

使用不同類型的卡板,iEAC -16能夠實現使用100/1000 Base-FX光纖、G.SHDSL.bis 規格的 2W/4W/8W銅線、VDSL2 線路 、或同軸電纜來傳輸 10 0/1000 Bas e-T 乙太網業務。種類多樣 的線路卡使得 iEAC-16對乙太網業務的承載更加靈活有效,可以同時連接光纖或銅線,適用場景 非常豐富,該 產品是一款 理想的高密度乙太網延伸設備。

報價  型錄

  • 特色

    • 電信等級高密度乙太網 延伸設備
    • 使用光纖或G.SDHSL.bis/VDSL2雙絞線,承載高品質乙太網信號
    • 可提供光纖網路的連接和轉換
    • 管理方式:SNMP/NMS, Web GUI, CLI
    • 多線對綁定功能,實現兩倍或四倍 頻寬
    • 中心端和遠端均支持鏈 路層OAM
    • 單一按鍵實 現連接診斷功能
    • 卡板均支持熱插拔,雙電源備份, 節能風扇
  • 規格

    Model

    IEAC-16, 19″ chassis shelf with 16 slots for line cards
    IEAC-AC: AC Power Input: 100 ~ 240V, 50/60Hz (160W)
    iEAC-DC: DC Power Input: -36 ~ -72V (160W MTR-AC, 90~260VAC Power Module

    • iEAC-16: Intelligent Ethernet Access Chassis
    • MCU-16: Controller of iEAC-16 with NMS/WEB agent
    • FNTU 761C/GE: 802.3ah Gigabit Ethernet Fiber MUX Network TDM Unit with Balanced E1(RJ-48)
    • FNTU 761CU/GE: 802.3ah Gigabit Ethernet Fiber MUX Network TDM Unit with Unbalanced E1(BNC)
    • ENTU 763C/GE: 802.3ah Gigabit Ethernet with a 1.25G SFP Transceiver slot; Optional SFP trunk module selectable; Card type
    • ENTU 763C/FE: 02.3ah Fast Ethernet NTU with a 155M SFP Transceiver slot; Optional SFP trunk module selectable; Card type
    • ENTU 763GO: Optical-Electrical-Optical Converter; Card type
    • SNTU 764C/2W: G.shdsl.bis 2-wire RJ-45 to 10/100Base-TX RJ-45, Card type
    • SNTU 764C/4W: G.shdsl.bis 4-wire RJ-45 to 10/100Base-TX RJ-45, Card type
    • SNTU 764C/8W: G.shdsl.bis 8-wire RJ-45 to 10/100Base-TX RJ-45, Card type
    • SNTU 765C/4W: G.shdsl.bis 4-wire RJ-45 to 10/100Base-TX RJ-45 and E1 interface, Card type
    • VNTU 766C: VDSL RJ-11 to 10/100Base-TX RJ-45, Card type
    • VNTU 766CX: VDSL BNC to 10/100Base-TX RJ-45, Card type
    Physical Slot
    • iEAC-16 chassis is containing a controller MCU-16, redundant AC/DC power modules and 16 slots for three types of line cards. Including FNTU, ENTU, SNTU and VNTU, all modules are hot swappable, managed through Web GUI, CLI (Telnet and craft port).
    Optical Interface
    • Connector type: SFP-LC
    Ethernet Interface
    • Connector type: Shield RJ-45 jack
    • ENTU 763S/FE: 100Base-FX SFP modules
    • ENTU 763S/GE: 1000Base-X SFP modules
    LED Indicators
    • MCU-16: MAJ/MIN ALM, FAN, FAN ON, PWR1, PWR2, ETH LNK/SPD
    • FNTU: PWR, LNK, TST, ALM, E1, LAN Tx/Rx, LNK/SPD
    • ENTU: PWR, CO, LNK, TST, RF, TP, LAN LNK/SPD
    • SNTU: PWR, CO, ALM, TST, L1~L4, ETH LNK/SPD
    • VNTU: PWR, CO, LNK, TST, LAN LNK/SPD
    Power Requirement
    • Hot Swappable Redundant Power Modules:
    • DC: -36 ~ -72 VDC;
    • AC: 100 ~ 240V, 50 ~ 60Hz
    Dimension
    • Line cards:84(W) x 168(D) x 24(H) mm.
    • iEAC-16: 480(W) x 366(D) x 89(H) mm.
    Operating Environment
    • Operation temperature: 0oC ~ 50oC
    • Storage temperature: -25oC ~ 70oC
    • Relative humidity: up to 90% (non-condensing)
  • 應用

    應用