G.SHDSL.bis EFM/ TDM 網路延伸器 – E1 V.35

TAINET Comet 163xF 系列是所謂的乙太網接入設備 (EAD)、乙太網媒體數據轉換器 (MDC)、乙太網多工器 (EMUX) 或乙太網 DSL 數據機,採用了最新的 G.SHDSL.bis 傳輸標準,具有支持可選用的 EFM/ DBM/ TDM/ HDLC/ ATM 各種傳輸模式。該微型終端支持從乙太網 E1、Nx64k 數據和 RS-232 傳輸流量通過 2/ 4 線 G.SHDSL.bis 鏈路以 15 M/ 30 Mbps 的線速連接接口。

Comet 163xF TDM 系列支持高速和專用對稱數據傳輸,利用 DSL 頻寬,當數據速率在 2 Mbps 以內時,傳輸距離可以達到 6 km,當傳輸距離在 3 km 以內時,數據速率可能會超過 4 Mbps。此外,彗星163xF TDM 系列與智慧乙太網訪問機箱 TAINET iEAC-16 完全兼容,此組合設計在與中心局端配合使用,特別是用於長距離乙太網接取服務,通過提供多對綁定,它解決了 ADSL/ VDSL 的距離限制的缺點。

Comet 163xF TDM 系列是電信運營商、服務提供商和企業用戶的理想解決方案,為了減輕操作/管理上的負擔,基於 ITU-T 建議 G.991.2
標準,Comet 163xF TDM 系列的管理者可透過以下方式配置數據機,包含 Console 控制口、Telnet (SSH)、WEB (HTTP/ HTTPS)、TR-069 或 SNMP v1/ v2c/ v3 輕鬆地完成配置管理。

報價  型錄

  • 特色

    • Point to point Ethernet and TDM MUX data extender over multiple G.SHDSL.bis copper lines.
    • Compliant with ITU-T G.991.2 standard, TC-PAM 4/8/16/32/64/128 line coding and 802.3ah EFM 2Base-TL bonding.
    • 1 or 2 pairs G.SHDSL.bis with 5.7Mbps per pair.
    • Supports extension rate up to 30.6 Mbps over 2 pairs of copper.
    • Support various interface includes Fast Ethernet, E1, RS-232, EIA-530, X.21 and V.35.
    • Front panel LED indicators for ease of status monitoring.
    • Easy installation by Profiles, Console, Telnet (SSH), WEB GUI(HTTPS), SNMP (v1/v2c/v3) or TR-069.
    • Remote software upgrade for field-deployed units via TFTP or HTTP/HTTPS.
    • Ethernet Routing or Switching with VLAN prioritization and QoS.
    • Router function supports NAT/NAPT, DNS relay, DHCP client/server/relay, RIPv1/RIPv2 and Static route.
    • Support security-link feature and DSL line protection for data transmission.
    • Ethernet loop prevention by IEEE 802.1w RSTP and ITU-T G.8032 ERPS (Ethernet Ring Protection Switching).
    • Console/Serial COM switchable, comply with RFC 2217, may connect via TCP client/server or UTP mode.
  • 規格

    Model
    • Comet 1632F, 2-wire, 1 E1, 1 Nx64k Data, 2 Ethernet
    • Comet 1634F, 4-wire, 1 E1, 1 Nx64k Data, 2 Ethernet
    Line Interface - G.SHDSL.bis
    • Type: 2 or 4-wire
    • Standard: ITU-T G.991.2, ETSI 101 524
    • Bonding protocol: IEEE 802.3ah EFM 2Base-TL
    • Line rate: n x 64Kbps, n= 3~239 (2w), 6~478(4w)
    • Connector: 1 x RJ-45
    • Line coding: TC-PAM 4/8/16/32/64/128
    • Impedance: 135
    • ITU K.21 compliant
    • Transmission Mode: EFM/ DBM/ TDM/ HDLC/ ATM
    DTE Interface - Ethernet
    • Ethernet type: 2 x 10/100BaseT
    • Connector: RJ-45
    • Auto-MDI/MDIX detection, Full/half duplex support
    • Auto-negotiation for speed and duplex
    • Support Layer 2 function
    • IPv4/IPv6 supports
    DTE Interface - E1
    • Data Rate: 2.048Mbps
    • Connector: RJ-45 for balanced E1 120 W
    • (Optional external convert cable for unbalanced 75 W)
    • Line coding: HDB3
    • Framing: Framed /Framed+CRC /Unframed
    • Compliance: ITU-T G.703 and G.704
    • Jitter Performance: compliant with ITU-T G.823
    • Support BERT test mode
    DTE Interface - Nx64k Data
    • Connector: DB-25 Female with optional adapter cable (V35/X21/RS449/RS530/RS530A/RS-232)
    • V.35/RS530 Data Rate: n x 64Kbps, up to 4.6Mbps
    • - DTE and DCE clock settings
    • - Full duplex
    • - Synchronous Data Rates
    • RS232 Data Rates: V24-nx64,n=1~3
    • - Asynchronous 300/ 600/ 1200/ 2400/ 4800/ 9600/ 19200/ 38400/ 48000/ 56000/ 57600/ 115200 bps
    • - Synchronous 1200/ 2400/ 4800/ 9600/ 19200/ 38400/ 57600/ 115200 bps
    • - Packet data bit : 7/8 bit
    • - Packet stop bit (1 or 2 bit ) can be selected
    Timing Source Function
    • Internal clock
    • Received clock from DSL line
    • External clock from DTE interface (E1 or Nx64k Data)
    Console / Serial over IP
    • Serial type: RS-232C, DCE mode
    • Connector: D-Sub 9 pin
    • Data Rate: Asynchronous. 300~115200bps
    • Pattern: 5~8 data bits, Even/Odd/Non-parity bit, 1 or 2 stop bit
    • Protocol: RFC-2217(Telnet), TCP (Virtual COM), UDP
    • Adaption Mode: Console, Client or Server mode
    Ethernet Networking function
    • Supports 802.1d transparent bridge function
    • Supports ACL function
    • Scalable per port bandwidth control (Step = 64K, up to 100M)
    • Supports 802.3x flow control
    • 2K MAC learning address
    • Ethernet packet length 9K Jumbo frame for LAN and up to 2048 bytes for WAN (DSL)
    • Provides 802.1q VLAN tagging, up to 4094 VLAN ID
    • Supports 802.1p QoS facility
    • ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
    • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    • Support SNTP protocol to get network time
    • DHCP Client/ Server/ Relay
    • Static Route and RIPv1/RIPv2 dynamic routing
    • Point to Point over Ethernet (PPPoE) protocol support
    • Network and Port Address Translation (NAT & NAPT)
    • Virtual IP for different VLAN (LAN supports secondary IP)
    Management Interface
    • Console port: DB9 connector (RS232C)
    • Ethernet port: RJ-45 connector (Fast Ethernet)
    • Support remote management
    • Support Local and remote diagnostic status
    • Support Performance monitoring functions (PM)
    • Support VLAN Management function
    • Support remote upgrade via WEB or TFTP
    • Front panel reset to factory default button
    • Configuration via Console, Telnet (SSH), WEB GUI (HTTP/HTTPS) , SNMP v1/v2c/v3 and TR-069
    User Management
    • Support three access privilege levels for administrator, user/operator and guest/monitor
    • Administrator may create, modify and delete account
    • Operator can add、modify and manage devices
    • Monitor can only read and check the status of devices
    Security Management
    • Manage permission settings and queries
    • Supports security protocol SSHv2 / SNMPv3
    • Support login password complexity of 6 characters, uppercase and lowercase letters, digits, special symbols
    • Support login account permission level setting, operation log
    • Anti-camouflage attack mechanism: lock IP and delay login
    • Support SSL1.2, HTTPS secure encrypted connection access
    Performance Management
    • Historical performance query, report and monitoring
    • Performance data storage and query
    • Support ES / SES, SHDSL UAS count and query
    • SHDSL CRC error counting and querying
    • SHDSL SNR signal noise rate status query
    • SHDSL ATN signal attenuation status query
    Fault Management
    • Alarm status display
    • Support Current / History alarm log
    • Alarm Level setting and query: Critical、Major、Minor、Normal
    • Alarm logs (alarm type, time, status and Level)
    Alarm Prompt
    • Interface data loss alarm
    • Ethernet disconnection alarm
    • Clock source automatically switching alarms
    • DSL ATN line signal attenuation value alarm
    • DSL SNR signal noise rate value alarm
    • DSL CRC line loop check value alarm
    • E1 signal and packet loss alarm
    • Remote Power failure alarm (Dying Gasp)
    System Management
    • Supports Telnet/SSH、Web/HTTPS
    • Supports SNMPv3 network management interface
    • Control and monitor remote unit via Embedded Operation Channel (EOC)
    • Supports SNTP and OAM functions
    • Support Internal / External clock source
    Certification
    • ISO 9001 Quality Management
    • CE Approval, EN 55032, 55024, 61000-3-2, 61000-3-3
    • CE LVD Safety, IEC-62368-1, EN 62368-1
    • ITU-T K.21 Compliant
    Power Requirement
    • 100~240V AC to 12VDC adapter
    • DC 48V (Comet 163xF/DC48)
    • Power consumption< 6W
    LED Indicators
    • PWR, CPE, TST, ALM, DSL 1/2, LAN, E1, V35
    • Dual color LED for DSL status monitoring
    Operating Environment
    • Operation Temperature: 0°C ~ 50°C
    • Storage Temperature: -40°C ~ 70°C
    • Humidity: 90%, non-condensing
    Dimension
    • 200(W) x 150(D) x 39(H) mm
  • 應用

    應用